2011 - 2018 5.0L Ford F-150 Maintenance Schedule
Service Procedure |
Interval(s) |
Notes/Remarks |
Replace engine air filter |
30,000 miles |
Inspect at oil change intervals and replace as necessary |
Change engine oil & oil filter |
3,000 to 10,000 miles |
Change oil promptly when instrument panel message is displayed; 10,000 mile maximum between oil change intervals |
Replace fuel filter |
30,000 miles |
Frame mounted fuel filter |
Replace PCV valve |
N/A |
Inspect PCV valve condition at oil change intervals and replace as necessary |
Replace spark plugs |
100,000 miles (normal) |
Towing, hauling, extensive idling, and/or frequent operation in city driving conditions or heavy traffic will reduce spark plug life, thus the interval is reduced to 60,000 miles when operating in these conditions |
Replace serpentine belt(s) |
150,000 miles |
Inspect at oil change intervals, replace as necessary if belt(s) show signs of wear, cracking, or there is any audible indications of excessive belt wear (squeaking/squealing) |
Flush engine cooling system |
100,000 miles/6 years initial |
After initial 100,000 mile service, flush cooling system every 50,000 miles/3 years; replace thermostat, overflow tank cap, and radiator hoses |
Change automatic transmission fluid & filter |
150,000 miles |
Replace automatic transmission fluid and sump filter |
Change transfer case fluid |
150,000 miles |
Replace transfer case/axle fluid immediately if component is submerged in water for any period of time as water intrusion is likely; more frequent service may be advised when operating frequently in off-road conditions |
Change front differential fluid |
150,000 miles |
|
Change rear differential fluid |
150,000 miles |
2011 - 2018 5.0L F-150 Service Parts List
Note - unless otherwise annotated, part number applicable through 2018 model year; parts list compiled for Ford F-150 models only.
Part Description |
Part Number |
|
Engine air filter |
||
Engine oil filter |
||
Oil drain plug |
||
Oil fill cap |
||
Fuel filter |
||
Serpentine belt |
2011 - 2013 |
Motorcraft JK6541 (AC compressor belt) |
2014 |
Motorcraft JK4540 (AC compressor belt) |
|
2015 - 2017 |
Motorcraft JK4540 (AC compressor belt) |
|
2018 |
Motorcraft JK4533 (acc drive belt) |
|
Belt tensioner |
2011 - 2013 |
Motorcraft BT-111 (AC compressor) |
2014 - 2018 |
Motorcraft BT-127 (AC compressor) |
|
PCV valve |
2011 - 2014 |
|
2015 - 2018 |
||
Spark plug |
2011 - 2015 |
|
2016 - 2017 |
||
2018 |
Motorcraft SP-551 |
|
Ignition coil |
2011 - early 2016 |
|
late 2016 - 2017 |
||
2018 |
Motorcraft DG-565 (all cylinders except 3) |
|
Thermostat |
||
Thermostat housing gasket |
||
Upper radiator hose |
2011 - 2014 |
|
2015 - 2017 |
||
2018 |
||
Lower radiator hose |
2011 - 2014 |
|
2015 - 2018 |
||
Radiator overflow tank cap |
2011 - 2017 |
|
2018 |
||
Automatic transmission filter |
Sump filter |
|
Pump inlet filter |
||
Differential pan gasket |
8.8 rear diff |
|
9.75 rear diff |
||
10.50 rear diff |
2011 - 2018 5.0L F-150 Oil/Fluid Capacities & Specifications
|
Oil/Fluid Specification |
Oil/Fluid Capacity[1] |
||
Engine oil |
SAE 5W-20 full synthetic engine oil |
2011 - 2017 |
7.7 qts w/ filter |
|
2018 |
8.85 qts w/ filter |
|||
Engine coolant[2] |
50/50 Motorcraft VC-3-B orange engine coolant concentrate & distilled water OR Motorcraft VC-3DIL-B orange pre-diluted engine coolant |
2011 - 2014 |
4.25 gallons (17.0 qts) |
|
2015 - 2017 |
3.975 gallons (15.9 qts) |
|||
2018 |
3.475 gallons (13.9 qts) |
|||
Transmission fluid |
2011 - 2016 |
Ford MERCON LV automatic transmission fluid |
13.1 qts |
|
2017 - 2018 |
Ford MERCON ULV automatic transmission fluid |
|||
Transfer case fluid |
2011 - 2016 |
Ford XL-12 transfer case fluid |
1.5 - 1.6 qts |
|
2017 - 2018 |
Ford MERCON LV automatic transmission fluid |
|||
Transfer case fluid |
2011 - 2018 |
Ford MERCON LV automatic transmission fluid |
||
Front axle |
2011 - 2016 |
SAE 80W-90 gear oil (full synthetic recommended) |
1.75 qts |
|
2017 - 2018 |
SAE 75W-85 gear oil (full synthetic recommended) |
|||
Rear axle |
2011 - 2014 |
SAE 75W-140 full synthetic gear oil |
2.75 qts |
|
2015 - 2018 |
SAE 75W-85 full synthetic gear oil |
[1] Listed capacities for reference only; always fill to dipstick indicator, fill plug level, or applicable indicator. All measurements in U.S. gallons or quarts ("qts"), NOT Imperial units.
[2] Concentrated engine coolant must be diluted with distilled water in a 50/50 to 40/60 (40% water, 60% coolant) solution. Do not exceed a 60% coolant ratio as water pump damage or premature failure may occur. Pre-diluted engine coolant must NOT be mixed with water.
[3] Electronic shift-on-the-fly (ESOF) transfer case identifiable by shift pattern 2H, 4H, 4L.
[4]
Torque-on-demand transfer case identifiable by shift pattern 2H, 4A, 4H, 4L.